What are HVAC HEPA Air Filters

There is a growing demand for highly efficient air filters not just for residential homes but also in industrial and office environment. Problems like viruses and asthma continually drives end-users to demand for a more effective and efficient air filter. As an industrial manager you might be aware that the industry that you are managing runs an HVAC system and attached with this is an HVAC HEPA Air Filter. The name sounds so technical, isn?t it? A simple explanation then is given.

What is HVAC?

HVAC is an acronym, which means High Voltage Alternating Current. It is also commonly known as Heating, Ventilating and Air Conditioning. This is a system of climate control and is specifically designed for medium and large industries and office buildings. According to Wikipedia, the functions of heating, ventilating, and air-conditioning are closely intertwined because they all provide thermal comfort and indoor air quality that are acceptable, with reasonable cost and can be easily maintained.

What is HVAC HEPA Air Filters?

HVAC HEPA air filters are filters that can remove at least 99.97% of airborne particles and has a diameter of 0.3?micrometers. These kinds of filters consist of arranged fibers that can filter much smaller pollutants and particles.

The first HEPA filter was made in the 1940s and was used to prevent radioactive contaminants. Later in the 1950s, it has become more commercialized and became known as a highly efficient filters. It is being used in highly powered industries specifically for aerospace, pharmaceuticals, hospitals and nuclear power. Nowadays, a HVAC HEPA filter rating is the standard used by all other filters that even the US Department of Energy has specific requirements for HEPA filters.

HVAC HEPA air filter has even entered residential houses now but are limited. This is due to the fact that HVAC systems in most houses are not configured to support HEPA filters. But growing demand for HVAC HEPA air filters are growing because of the need for better indoor air quality. It is said that in year 2008, there shall be a major increase among residential homes needing these kinds air filters.

What can HVAC HEPA Air Filters Do For You?

If you are sensitive to airborne irritants, then HVAC HEPA air filters can do much for you. It can prevent allergens such as hair and lint. It can reduce dust and odors inside your house. Some irritants can also cause so much allergy problems. Unlike any other filters this kind of filter can capture the smallest pollutants. However, if you have been using these for a while, you should be aware that it needs to be replaced and cleaned regularly to achieve its highest effectiveness.

HVAV HEPA air filters is the standard for all air filters. You are surer that with this kind of air filter in your home, you can prevent many problems such as pollutants and irritants entering your respiratory system and therefore creating more problems later.

Your Furnace Installation Checklist

Furnaces are appliances that keep our homes warm permanently through the movement of air, hot water or steam. Since they produce a lot of heat, there may be times that the improper furnace installation may pose danger to our homes. Contractors are required to follow strict guidelines in order to ensure a safe and running furnace and to keep clients away from harm.

There are many things that a contractor takes into consideration before installing your furnace. Below is a checklist of the things that should be observed by a contractor:

  1. Load calculation – In order to know a home’s heating and cooling requirements, a contractor should understand the load calculation of the house. There are contractors who base or determine the needs for heating or cooling on the size of the house (square feet). This should not be the case because it will produce inaccurate information on the total load that a home can actually handle.
  2. Replacement – Contractors are not allowed to replace any parts of the furnace with any identical parts because there is a possibility that these are already incorrect originally.
  3. Ventilation – Venting systems should always be compliant to furnace installation requirements and regulations. Your old venting system can still be used as long as it is compatible to the new furnace you had installed by your contractor. However, for blower-type furnaces, it is required to have at least 2 square inches for every 1000 BTU. The rest of the furnaces only require 2 combustion openings.
  4. Garage furnaces – An elevation height of at least 18 inches from the floor of the garage to the point of ignition must be observed. At the same time, the furnace should be kept away from the path leading to the garage area.
  5. Restricted areas – Bedrooms, closets and bathrooms cannot be installed with gas-fired furnaces. Furnace installation in the attic requires a five feet space from the floor to the ceiling with a 30”x30” opening within 20 feet of the furnace’s location.
  6. Underfoot furnaces – Underfoot furnaces should have a light switch near it in order have visibility during operation. Suspended furnaces, on the other hand, must be elevate at a 6 inch height above the ground.
  7. Inspection – After the furnace installation, your contractor should provide a description of the installation for the building inspector to check. Chimneys are inspected to verify the compliance to the standard 350 degrees.

Hiring a contractor for your furnace installation needs can be a breeze if you have checked on skilled technicians who can do the job for you. It is very important to hire contractors that offer warranty on their work, especially if you have a furnace that is top of the line. A lot of furnaces have a five year warranty on parts and a lifetime warranty on the heat exchangers. It will be a great addition to have a contractor who will do a perfect installation job. Some will even offer added warranty on labor or money-back guarantees.

Top 6 Heating Tips for this Winter!

With winter approaching rapidly, getting your Oklahoma City heating system ready for winter weather is more than likely a great concern for you as a homeowner.  The Oklahoma City heating system is the lifeblood of the home during the colder months of the year, and the cost of heating your home during this time is probably one of your biggest upcoming expenditures.

The following tips will help you to get your heating system ready while also helping to reduce the cost of keeping your interior toasty warm.

Routine Maintenance

Early fall and early spring are the ideal times for you to have your Oklahoma City heating system inspected.  While you’re likely do basic maintenance tasks yourself, like changing out a furnace filter, an annual inspection of your Oklahoma City heating system is important to stave off costly repairs.

A certified technician can spot potential problems with your HVAC system before they become major issues, and can get your system ready for the cool weather ahead by making sure that everything is in good working order.

Filter Maintenance

Your HVAC air filter is an important part of your Oklahoma City heating and cooling system.  By replacing the air filter each month – your system will not have to work as hard, which means that it will use less energy.  Changing the filter regularly can also help your system to last longer.  Most folks can perform this simple task in addition to cleaning the vents and ducts to remove built up dust.

Updating an Older System

If you have an older Oklahoma City heating system, now may be the time to update it, or even replace it.  For example, a gas furnace that was installed prior to 1977 is likely to be as much as sixty percent less efficient today than a modern model.  What this translates to is around half of the fuel expended by the furnace actually reaching the home in the form of heat.  A modern gas furnace can achieve an efficiency rating as high as ninety-seven percent, which may cut your use of gas in half.  Now that’s savings!

Use a Programmable Thermostat

While most homeowners don’t have the knowledge to install a programmable thermostat on their own, having your Oklahoma City heating and cooling technician make this installation during your annual inspection is a good idea.  A programmable thermostat allows you to turn your heat down during the day when you are at work while you are asleep at night, and then back to a higher temperature when you need it.  It takes much less energy to warm a cool home than it does to keep the home warm all day.  With proper use of your programmable thermostat, you can cut your Oklahoma City heating costs by around twenty percent.

Use Your Ceiling Fans

Ceiling fans are not just a great idea for the summer, but they can be used during the cooler months of the year to blow air upward.  By reversing the direction of the fan, the blades move the air upward, which his particularly useful in rooms with high or vaulted ceiling where heat rises naturally and then is forced back down into the room.

Check Heating Vents

And finally, make sure that all of the Oklahoma City heating vents in the home are opened and that they are not blocked by furniture or other items.  This allows for an even distribution of air throughout the home. However, if you have rooms that are not being used, such as a guest bedroom, you can invariably close the vents to those areas in order to cut down on Heating energy costs.

What to Consider When Making Heating Repairs

Every home owner should know the fundamental concepts on how the heating system facilities operate in the home setting. This will also help the contractors in performing heating repairs in a more efficient manner. Some of the aspects that you will need to know are (1) the type of fuel that the heating system can burn; (2) the type of heating system that you are using; (3) how to shut down the heating system; and (4) the location of the heating system. These things are important because every household has a unique structure. Therefore, a single type of heating system may work differently for each household. Conversely, various heating systems can have different rates of heating for a single household.

Aside from this, it is equally important for you to determine how long the heating unit has been used. The “current age” of the heating unit can give you a clue on the level of efficiency and amount of heating that it can provide the entire household. Knowing how the heating unit should be operated and how you take care of it will help the contractors determine if the heating repairs that should be done are extensive. In line with this, you should know how to perform a routine assessment of your heating system. This will help the contractors easily determine the source of the problem. Also, it will be helpful for you to know the costs of its operation and repair. These will help you determine if a replacement is recommended instead of a repair.

There are various procedures that should be done in dealing with heating units. You have to consider these if you are interested in having heating repairs. For the forced heating units, you should consider the fact that all types have a blower motor or a pump in the furnace or boiler. As for the hydronic heating units, they are usually operated with the use of oil fired or gas fired burners. In some instances, some contractors would use electric resistance coils of the immersion type. This will allow the hot water to raise the level of pressure from the unit within a shorter span of time. In turn, this will allow the heat to be distributed more evenly. Eventually, the heat will dissipate so it gets to every part of the unit then to the room. Examples of these units are convectors, radiators, runtal radiators, and baseboards.

For the hot air heating units, you will have to consider the furnace itself for your heating repairs. Usually, the furnace will have to pull the air to the heat exchanger. At the same time, this will also let the cold air return. An additional duct may be needed to enhance the efficiency of the heating capability of this heating unit. Aside from that, you will also have to consider the use of heat registers. This will aid in directing the heat from the unit to the various rooms that need heating. You may ask your contractor to optimize this by providing a shutting and opening mechanism to increase the level of heat distributed among the rooms of the house. Resizing the cold return of the heating unit can also aid in maintaining the integrity not only of the entire heating unit but also of the heat exchanger. This can also help you reduce the amount of electricity, gas, or oil that is wasted every time you use the heating units.