What to Consider When Making Heating Repairs

Every home owner should know the fundamental concepts on how the heating system facilities operate in the home setting. This will also help the contractors in performing heating repairs in a more efficient manner. Some of the aspects that you will need to know are (1) the type of fuel that the heating system can burn; (2) the type of heating system that you are using; (3) how to shut down the heating system; and (4) the location of the heating system. These things are important because every household has a unique structure. Therefore, a single type of heating system may work differently for each household. Conversely, various heating systems can have different rates of heating for a single household.

Aside from this, it is equally important for you to determine how long the heating unit has been used. The “current age” of the heating unit can give you a clue on the level of efficiency and amount of heating that it can provide the entire household. Knowing how the heating unit should be operated and how you take care of it will help the contractors determine if the heating repairs that should be done are extensive. In line with this, you should know how to perform a routine assessment of your heating system. This will help the contractors easily determine the source of the problem. Also, it will be helpful for you to know the costs of its operation and repair. These will help you determine if a replacement is recommended instead of a repair.

There are various procedures that should be done in dealing with heating units. You have to consider these if you are interested in having heating repairs. For the forced heating units, you should consider the fact that all types have a blower motor or a pump in the furnace or boiler. As for the hydronic heating units, they are usually operated with the use of oil fired or gas fired burners. In some instances, some contractors would use electric resistance coils of the immersion type. This will allow the hot water to raise the level of pressure from the unit within a shorter span of time. In turn, this will allow the heat to be distributed more evenly. Eventually, the heat will dissipate so it gets to every part of the unit then to the room. Examples of these units are convectors, radiators, runtal radiators, and baseboards.

For the hot air heating units, you will have to consider the furnace itself for your heating repairs. Usually, the furnace will have to pull the air to the heat exchanger. At the same time, this will also let the cold air return. An additional duct may be needed to enhance the efficiency of the heating capability of this heating unit. Aside from that, you will also have to consider the use of heat registers. This will aid in directing the heat from the unit to the various rooms that need heating. You may ask your contractor to optimize this by providing a shutting and opening mechanism to increase the level of heat distributed among the rooms of the house. Resizing the cold return of the heating unit can also aid in maintaining the integrity not only of the entire heating unit but also of the heat exchanger. This can also help you reduce the amount of electricity, gas, or oil that is wasted every time you use the heating units.

Top 7 Reasons For Heating Repairs

Winters in Oklahoma can be fairly cold, and no one wants to find themselves needing heating repairs in midwinter. Unfortunately, as with all things, heaters can have their share of problems, which can be difficult to predict. Oklahoma City homeowners may find themselves needing heating repairs for any of a number of reasons. However, there are some problems that occur with heaters which are actually fairly commonplace. These are some of the most common problems that can result in a call to your trusted HVAC specialists.

  • A malfunctioning thermostat. Believe it or not, many calls for heating repairs in Oklahoma City don’t turn out to involve the heater itself, but the thermostat. A thermostat that’s gone haywire can make it look like your furnace isn’t giving off any heat at all, or like its temperatures are fluctuating wildly for no apparent reason. A qualified HVAC technician will be able to tell if the problem is actually the thermostat, and if so, they can repair it easily.
  • Air flow limitations can also cause a need for heating repairs. Air flow is an important aspect of your heating system.
  • Faulty ductwork. Problems can easily arise within air ducts. Holes, cracks, damaged seals, or obstructions can impair your heater’s ability to work properly. If your heating bill has been increasing for no apparent reason, this might indicate that there could be a leak in the ductwork.
  • Clogged air filters are, in fact, among the most common causes for Oklahoma City heating repairs. These filters are designed to screen out dust and other small debris, preventing it from damaging fans and other parts of the heating system itself. It’s important to replace the filters regularly, especially during the season when you’re using the heater the most.
  • Ignition problems. When it comes to combustible heating systems, it won’t work if it won’t ignite. Several issues could cause this problem, including a damaged thermocouple, malfunctioning igniter, or even dust and dirt in the burner area.
  • A blown fuse or tripped breaker is simple for an HVAC specialist to fix, but can result in the whole heating system refusing to work.
  • An extinguished pilot light is another reason you might find yourself needing heater repairs. Pilot lights are small gas flames that serve as ignition sources in central heating systems.

These and other common malfunctions could leave you in need of heating repairs in Oklahoma City. Although the source of the problem is rarely apparent to the untrained eye, the qualified HVAC specialists at Advanced Air Specialist can easily figure out what’s wrong. Fortunately, most of these issues are easily fixable by a professional.

The Most Common Heating Problems Homeowners Encounter

During the colder parts of the year, your home’s heating unit is put under a tremendous amount of pressure, and one of your biggest priorities is keeping it in excellent condition. When the weather reaches its lowest temperatures, you need to know that you can rely on your heating system, and when you do encounter any problems with it, you need prompt and professional repairs. At Advanced Air Specialist, our professional Oklahoma City heating contractors are always able ready and eager to provide you with any heating repairs you need, and we can completely eliminate any problems that your encounter with the system.

Your heating system could need repairs or any number of reason, but some problems are more common than others. If you’ve noticed that your heating system isn’t functioning well, or that your heating costs have been higher than normal, consider whether it’s suffering from some of these common problems:

Lack of Maintenance

Your furnace requires frequent maintenance and prompt repairs. You need your heating system to be in the best condition possible so that it can keep your Oklahoma City home warm throughout the winter months, and having regular maintenance performed on it is the best way to do that. Without regular maintenance, you’ll see significant and unexpected problems crop up.

Our professionals recommend you have a heating tune-up performed at least once a year to prevent any unexpected breakdowns, ensure excellent performance, and keep your energy costs low.

Dirty of Clogged Filters

During the fall and winter, you should replace or clean your air filters about once each month. This is one of the most important things you can do for your heating system. It will extend the life of your furnace and enhance its efficiency. Dirty filters restrict air flow, which means that your heating unit will need to work harder to distribute heated air throughout your home.

Wear and Tear

Your furnace is made up of many smaller mechanical parts. When any of these experience wear-and-tear, it can cause major issues with your heater’s performance. You should have your belts and bearings, fan motors, and heating elements checked during an annual heating inspection.

Pilot or Ignition Control Problems

If your furnace is only providing heat intermittently, or it’s not producing heat at all, you may have a problem with your furnace’s ignition control. Your furnace probably uses one of two types of ignition systems:

  • Hot Surface Ignition, or
  • Intermittent Pilot

Hot surface ignition systems use “resistance heating” elements, which are controlled electronically to ignite the gas burner. The intermittent pilot system is also electronically controlled, but it uses a high voltage electrical spark to ignite the gas pilot, then the main burners, whenever the thermostat calls for heat. When you have problems with your ignition control, it will prevent your heating unit from providing your Oklahoma City home with heat.