How Roof and Attic Insulation Can be Part of an Energy Saving Plan

It gets cold and damp in season and homeowners need to keep warm. Many of the homes are older without heating systems and insulation that meet today’s energy saving standards. If the home is poorly insulated using an insufficient heating system, winter heating bills can be very high. There are many simple projects that can reduce the heating bills in every home helping to reduce CO2 gas in the atmosphere.

First, a summation of home defects leading to energy waste. Much of the energy loss comes from poorly designed homes, insufficient insulation, poor, old or insufficient heating systems, older, inefficient appliances, outdated home lighting and finally, poor homeowner energy use habits. Many Oklahoma City homeowners don’t know what is causing the high energy bills, or how to fix it. Public education is of vital importance in saving energy and reducing CO2 gas emissions to the atmosphere.

The homeowner must have all the work done first, then get awarded the grant. A BER assessment is recommended, but optional, before and after the work is done. This used to be required. Work to be done for this grant is:

1. Insulation in attic up to 12 inches
2. Drought proofing in and around windows, doors, walls and roofs.
3. Jacketing hot water cylinders with kits or pink glass wool and kraft paper vapor barrier.
4. Switching to low energy light bulbs like CFL.
5. Cavity wall insulation with blown in glass wool, foam or plastic beads.
6. Energy advice on energy use habits and other ways to save on energy use.

This grant scheme is a good start, but will not cover the homeowner, on a small budget, who wants to do only part of the things needed at a time. A plan still needed, is one that is very attractive to all homeowners and is simple and easy to use. It should have grants for smaller projects, since any change for the better helps the environment.

* Check into roof insulation at the local home goods store. If it is possible for the home owner to install the roof insulation on their own, this is an inexpensive project that will pay for itself in energy savings over the next few years. Roof insulation can be done by local contractors or handy men if the homeowner is not able.

* Attic insulation should be up to 12in thick. It is laid between ceiling joists and over them. Pink glass sheets with paper vapor barrier, come in rolls, and can be used with little mess. Plastic beads, blown in glass wool or sprayed on foam insulation can be used. Heat rises, so attic insulation will stop the heat from being wasted. Lack of attic insulation is one of the biggest energy wasters. It doesn’t make much sense to pay huge heat bills for energy that is going through the roof.